Solar charger 4200mAh for cell phones, digital camera, MP3, MP4,'t a MP5, PDA (PDA), IPC, PSP, radio, portable CD, ipod, mobile DV, GPS and so on

Specification:

Solar panels peak power: 1.6 W / 5.5 V

Input interface: DC interface

Output interface: USB 5P interface

Polymer lithium battery capacity: 4200mAh

Solar recharge time: 14-20 hours (sun light intensity 1000W/m2) :

Solar recharge current: 230mA - 300mA (the sun light intensity 1000W/m2) :

External input dc voltage: 4.8v - 750 V + 0.5 V

External dc input current: 1200mA (1A) 900mA -

External DC power charging time: 3.5-5.5 hours

Adjustable output voltage: DC4.8 V / 5.8 V / 8.4 V/V (9.0-0.2 V + -

Output current: 400mA 800mA (0.8 A) -

Low electricity hint: when the battery is insufficient, LED the lights flashing tip charge.

Product size: 128X80X20 mm

Net weight: approximately 220 grams

Method of use:

1, before using it please give this product charging. There are three methods can choose:

A, solar recharge: open products placed on the sun place or light, the sun will be turned into electrical energy automatic for built-in

Lithium battery charging. At this time the product the LED to red, said recharging, when the battery is filled, LED light will change

For the green. (internal circuit design automatic power protection function)

C, computer USB to product charge: will the product USES USB cable to connect the camera to your computer to the USB port, when product the LED to red, said

Recharging, when the battery is filled, LED light will become green. (built-in advanced power management chip doesn't tell you PC production

Born any harm)

C, using ac adapter charge: fast-recharging USB instructions parade on the light, the product the LED to red, said recharging, when

Batteries, LED light will become green, and close all output. Additional, still can use our product car-mounted charger

Charging.

2 and when to give you a phone or digital products charging before, please carefully check your product manual or power adapter, you understand your product

Recharging voltage and then press the ON/OFF button (3 seconds a 5 seconds) can boot, boot, red LED voltage indicator, after startup production

Product default output 4.8v, long press adjusting button (3 seconds a 5 seconds) namely can adjust output 4.8, 5.8 V, 8.4 V, 9.0 V. Per long

According to the once, can adjust a voltage output voltage, adjust good after charging conversion line USB 5P plug connection to the product, then

The other end with the corresponding turn joints connected, and then connect to your product, can be recharged. Fast-recharging, in your mobile and

Digital products will show recharging tips, you can be in charge of mobile communication used simultaneously. (internal circuit has

Intelligent protection function, when you recharging voltage setting not at that time, the product will automatic protection. )

3, after startup, when again ON/OFF button long press: it can brighten ultra bright LED, it can be used in your insufficient light or dark place lighting

Use, its power consumption is tiny, the machine can illume 100 hours; Again ON/OFF button long press, the machine is turned OFF